|Capacity||300 cu. ft.|
|Electrical Requirements||Requires a dedicated 115-volt 20-amp circuit. UL and ETL listed|
|Temp Delta||30F temperature differential (maintains proper cellar temperature when exhaust environment does not exceed 85F)|
|Outside Venting||Not recommended unless exhaust environment will not exceed 85F|
|Ducting Options||ONLY the exhaust side can be ducted using the optional ducting kit|
What's included in my shipment?
- Installation Guide
- Self-contained cooling system
- Condensation tube
- Power cord
- Any upgrades purchased with unit
- 2 year parts and labor / 5 year compressor
WhisperKOOL SC2000i Features:The WhisperKOOL SC2000i is designed to fit between standard wall studs for simple "through-the-wall" installation. Ideally suited to interior installation, the SC2000i includes an advanced digital controller, dynamic airflow and front or rear power.
- 30°F temperature differential
- Limited 2 year parts and labor / 5 year compressor warranty
Advanced Digital Controller
Easily view wine temperature, evaporator coil temperature, and condensing coil temperature. Constantly monitors system and environment conditions for efficiency and performance. Emits an audible alert in the event of an alarm situation to keep your environment safe.
No worrying about fluctuating temperature. The unit directly measures the temperature of the wine it is maintaining.
Following the simple philosophy that hot air rises. The fans are designed to project the cooled air in an upward direction. This results in the settling cooled air to exchange with the warm air very effectively.
Efficient Coil Design
Larger, thicker, coils offer increased capacity for cooling the cellar. At the same time oversized coils create more effective heat dissipation on the condenser side of the cooling unit where most problematic issues associated with poor ventilation and thus poor performance occur.
Coated Evaporator Coil
Since the evaporator coil produces condensation during operation, the coil is consistently wet. The coating protects agaisnt any corrosain that could reduce performance over time.
Provide power to the unit from either side of the enviornment. Simply plug it in, flip the switch, and your cooling.
During the condensation process a lot of heat is generated. The unit re-uses this heat to help evaporate the excess condensate which, in turn, helps reduce heat and raise efficiency. Truly a win win.
Single Piece Mounting Bracket
A very sturdy mounting solution. Simplifies the installation process and helps insulate the through-the-wall opening.
Electro-magnetically applied and baked on at high temperatures. The finish is basically one with the unit, inside and out.
Safety StandardsUL & ETL Listed
On top of our rigorous testing during development, we proudly carry the UL or ETL mark on all of our products. Products bearing these marks have been independently tested by a Nationally Recognized Testing Laboratory (NTRL) to be in compliance with standards prescribed by the Occupational Safety and Health Administration (OSHA). The marks also indicate that our production site conforms to a range of compliance measures and is subject to periodic follow-up inspections to verify continued conformance.
Though the UL mark is more commonly known, it is not the only Nationally Recognized Testing Laboratory (NRTL) in the US. ETL is also proof of product compliance to North American safety standards, including UL, ANSI, ASTM, and NFPA standards. Both of these marks are assurance that our products are compliant with safety standards, having been tested and certified by a third-party organization.
WhisperKool WarrantyA limited 2-year parts and labor / 5-year compressor warranty is offered with all of our cooling units/systems at their date of purchase. All warranty claims must be filed directly through WhisperKool customer service (1.800.343.9463 ext. 799). We provide warranty repairs at our manufacturing facility in Stockton, CA or, with prior permission from WhisperKool, by a licensed HVAC/R technician. In the event a unit is not reparable in the field, and is still under warranty, we will cover shipping costs (excluding customs fees and duties).
The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or beyond the control of WhisperKool, shall not be considered defects in material or workmanship and is not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, maintenance, installation, service/repair, or improper use.
Thermostat: Advanced Digital Controller
Featuring a built-in digital controller, coil temperatures and bottle temperatures can be viewed individually.
Temp. Delta: 30°F temperature differential (maintains proper cellar temperature when exhaust environment does not exceed 85°F)
SC Series AccessoriesWhisperKOOL accessories to enhance and customize your wine cooling unit
Exhaust Ducting Kit
This kit allows the exhaust side of the unit to be ducted to an area (most cases outside) where the additional heat will not matter.
Protects the unit from the weather elements when placed on the exhaust side.
Condensate Pump Kit
The condensate pump kit is designed as an automatic condensate removal pump for water dripping out of our cooling units' drain line. The pump is controlled by a float/switch mechanism that turns the pump on when approximately 2-1/4" of water collects in the tank, and automatically switches off when the tank drains to approximately 1-1/4". The condensate pump kit allows the excess condensate to be pumped up to 20ft away from the unit.
Questions and Answers
Product DescriptionThe WhisperKOOL SC 2000i wine cellar cooling unit is designed to effectively and efficiently cool properly insulated smaller wine cellars up to 350 cubic feet in size. As a direct replacement to the WhisperKOOL XLT 1600, the WhisperKOOL SC 2000i is the perfect solution for individuals seeking a reliable wine cellar cooling unit. Like the other models in the WhisperKOOL SC Series, the SC 2000i unit is built for quick and easy installation with through-the-wall installation technology and a single piece mounting bracket, eliminating the need for a support shelf. The SC 2000i is perfect for smaller wine cellars, such as the personal at- home custom wine cellar or small-scale commercial wine cellar. The improved performance and increased durability of the unit comes from its high-end components and all-new housing design. The new Condensation Reduction System increases unit efficiency and reduces electrical usage during operation. This unit has a 30°F temperature differential. In order to keep your cellar at 55°F, the area the unit exhausts into should not exceed 85°F. This makes interior installation ideal for SC series units.
If you need assistance in finding the right WhisperKOOL SC Series Cooling System, call us at 1-800-876-8789 for expert advice. We also carry the full line of WhisperKOOL wine cooling systems.